Hi Sankarsan ,
I am very thankful for your help .
I did implement as you said, but the problem is that your PCR are calculating for monthly again . When i check the time type for accumulated planned working time for the entire month it came to 1 month total which should rather be only for the week .
I guess the PCR ZUTQ has ADDMBXXXX , which I suspect is the problem .
My requirement is as follows :
Take any week : 01.09.2014 to 07.09.2014
01.09.2014 = 8(planned) 4 (Actual)
02.09.2014 = 8(planned ) 10(Actual )
03.09.2014 = 8(planned ) 10(Actual )
04.09.2014 = 8(planned ) 8 (Actual )
05.09.2014 = 8(planned ) 8 (Actual )
06.09.2014 = 0(planned ) 0 (Actual )
07.09.2014 = 0(planned ) 0 (Actual )
Total planned = 40
Total Actual = 40
Overtime =0
Take any week : 08.09.2014 to 14.09.2014
01.09.2014 = 8(planned) 8 (Actual)
02.09.2014 = 8(planned ) 10(Actual )
03.09.2014 = 8(planned ) 10(Actual )
04.09.2014 = 8(planned ) 8 (Actual )
05.09.2014 = 8(planned ) 8 (Actual )
06.09.2014 = 0(planned ) 0 (Actual )
07.09.2014 = 0(planned ) 0 (Actual )
Total planned = 40
Total Actual = 44
Overtime =4
Accordingly :
I would need 3 time types as below :
One time-type should find out total planned hours : say 9996 ( weekly )
One time-type should find out total actual hours : say 9997 ( weekly )
One time- type should find difference planned hours - actual : say 9998 ( weekly )
Now this time type 9998 should update to quota type :
For next week the value for all the above time types should start with zero .
If you can help me with 3 PCR;s to perform the above operation , it would be very great !
Hope I am clear now .
Regards ,
Deb